DS213 is a pocket size digital storage oscilloscope is small enough to take it anywhere，and fulfills basic electronic engineering requirements;Uses FPGA to manage external ADC’s control and data cache mode;
It provides 4 application partitions for loading and upgrading up to 4 different application firmware;
DS213 is a “5-track, 4-wave line” digital storage oscilloscope for general-purpose electronic engineering task and it is based on ARM Cortex M3 core;
Inbuilt 8MB U-disk storage for waveform data and images;
Can be powered by internal batteries, so in the field measurement, the ground wire is completely suspended, can be exactly like a multi-meter, point where to measure, without considering the problem of grounding isolation;
The oscilloscope code application layer is open source;
Users can develop firmware according to different needs;
Can meet the demands in many fields, such as, school experiments, electronic repairing, and electric engineering.
Specifications
- MCU: STM32F103VE
- ADC: HWD9288
- Channels: 2 Analog channels+2 Digital channels
- Analog Bandwidth: 15MHz
- Max Sample Rate: 100MSa/s
- Max Sample Memory Depth: 4K
- Horizontal sensitivity: 100nS/Div~1S/Div(1-2-5 sequence step)
- Vertical Sensitivity: 10mv/Div~10V/Div(1-2-5 sequence step)
- Analog Input Impedance: 1MΩ
- Coupling: DC/AC
-
Trigger Mode: [Ascend/Descend Edge Trigger Mode] [Positive/Negative Pulse Trigger] [Logic Trigger]
- AUTO_FIT: non
- Math Waveforms: INV A, INV B, A+B, A-B, C&D, C|D, RecA, RecB, RecC, RecD
- Inbuilt Signal Generator: Sine/Square/Triangle/Sawtooth wave
- Synchronous Mode: Auto, Normal, Single, Slow
- Auto Measurement: Signal sequence/cycle/duty ratio, peak voltage/virtual value/max value/min value/average
- Storage: 8MB USB flash disk memory
- APPs installed: 2
- Operation: Button, Encoder
- USB port: MicroUSB
- Battery: 1000mAh
- Screen Size: 3"
- Screen Resolution: 400×240
- Dimension: 99.5mmX58.5mmX13.5mm
- Weight(with Battery): 129g
- Open Source: Application layer Open-Source
- Certifications: CE/FCC
Package Included:
- 1 x DS213 Mini Oscilloscope;
- 1 x DSO Probe x1;
- 1 x DSO Probe x10;
- 1 x Safety Instruction;
- 1 x Hex Key;
- 1 x microUSB cable.
